Product Categories
- GESSI--Italian brand
- Washroom Accessories
- Koala Kare Child Care Products
- NIBCO VALVE
- Bronze Gate
- Bronze Ball
- Bronze globe valve
- Bronze check valves
- Bronze Y-strainer
- Ductile Iron Gate
- Ductile Iron Butterfly Valves
- Ductile Iron Check Valves
- Ductile iron Y-strainer
- Stainless steel ball valve
- Stainless steel butterfly
- Gate Valve - Cast Iron
- Cast iron check valves
- Brass Gate Valves
- Brass Ball Valves
- Carbon Steel Ball Valve
- Two-Piece Bronze Ball Valve – ISO Mount and Actuator
- Butterfly Valve - Cast Iron, International, Wafer Type
- Circuit Balancing Valve
- Dolphin海豚(英国品牌)
- SLOAN VALVE
- Brodware faucet - Australian brand
- VISSONI faucet - American brand
- Italian FIR ITALIA brand
- WAGNER-EWAR
- Bradley
- Chicago Faucets
Contact Us
- American multinational trading companies Bobrick
Address: 2505 Jinhai Road, Pudong District, Shanghai, Lane on the 9th city square
Email: LDF949595@163.com
Tel 021 -65442719
Fax 021 -65446825
Mobile: 18818016390
Brands:Washroom Accessories
Model:
Description:Bobrick B-2890 Single 10" Roll Toilet Tissue Dispenser for 3" diameter core rolls
MATERIAL :
Mounting Plate — 16-gauge (1.6mm) steel with powder-coated finish.
Door — Type-430, 22-gauge (0.8mm) stainless steel with satin-finish. Slot reveals toilet tissue supply inside cabinet. Equipped with a lock not keyed like other Bobrick Washroom Equipment accessories.
Spindle — Removable plastic spindle adapter converts to smaller spindle. Fixed inner spindle, 20 gauge (0.9mm) steel with powder coated finish.
OPERATION :
Door unlocks with key provided and swings down for loading dispenser. Spindle adapter accommodates one toilet tissue roll up to 10" (255mm) diameter with 3" (75mm) core, or remove the plastic spindle adapter to accommodate a 1-5/8" (40mm) diameter core roll. Rubber o-rings (2) (furnished by manufacturer) may be added to the steel inner spindle to accommodate a 2-1/8" (55mm) diameter core roll. Wide viewing slot in door reveals the amount of toilet tissue on roll. Unit is designed for quick reloading.
INSTALLATION :
Mount unit on wall or toilet partition with five sheet-metal screws (not furnished) at points indicated by an S. Rear edge of unit should be 20" (510mm) from back wall. This locates toilet tissue within 12" (305mm) of front of standard toilet that projects 30" (305mm) from
back wall. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 6mm (1/4") toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
SPECIFICATION :
Single jumbo-roll toilet tissue dispenser door shall be 22-gauge (0.8mm) stainless steel with satin-finish. Door shall be equipped with a lock not keyed like other Bobrick washroom accessories. Door shall have a slot to reveal toilet tissue supply inside cabinet. Spindle adapter shall accommodate one toilet tissue roll up to 10" (255mm) diameter with 3" (75mm) core. Spindle shall be convertible in the field to dispense a 1-5/8" (40mm) diameter core roll by removing plastic spindle adapter. Spindle shall be convertible in the field to dispense a 2-1/8" (55mm) diameter core roll by adding rubber o-rings (2) furnished. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.